First time we are using a 2188 for our wheat harvest. Got the machine from the rice areas down south and found it is equipped with a specialty rotor with spiked rice bars through out the rotor. Using large wire concaves with cover plates installed in the first 3 positions and a set of disruptors in the grate area. Combine has a cutting straw chopper but the knives were not engaged. Our only experience with this machine was in soybeans last year. Based on the items I found and and installed, is there anything else I should consider settings wise or other wise to handle a heavy wheat crop with a few weeds. We usually try to bale wheat straw but we might try to incorporate one field back into the soil. With all the off and on rains, we think we will have short windows to get the crop in. Any help would be appreciated. Printed off a good source for initial settings. Anyone have experience with this set up? Operating with a 25 foot head.