Gleaner F2

Danney970 · Jul 8, 2016

I have a f2 hydro corn plus that I am going to be using in wheat for the first time. I have the 10.25 pulley but am unsure of what belt to use also any other pointers would be greatly appreciated.
Thanks dennis

JMS/.MN · Jul 8, 2016

You can"t mess up- I think only one belt will fit the pulley...other typical pulley is around 15 inch, for corn/soy, and that belt will not fit the small grain pulley. Small pulley will run up to around 1100 rpm, which is needed for threshing wheat, oats, barley, etc. ok, in retrospect, I"m thinking of the smaller pulley, about 8-9 inches, that gives the 1100 rpm. That, and the 15 inch, each have their own belts.

MikeinKy · Jul 8, 2016

I used to have an F2 and I had 3 pulleys and 3 different size belts. One for small grain, one for corn and one for beans.

Gleaner F2

Danney970

Member

JMS/.MN

Well-known Member

MikeinKy

Well-known Member

Similar threads