(800) 853-2651
SHOP NOW

John Deere 65 combine parts

F

Farmallman2013

Member
I have a 65 John Deere combine and I am curious if parts off the 55 would fit the 65? I first off need the clean and return elevator chains, second I need to find a way to make the head back into a straight cut head as in I need to put a reel on it as well as a sickle. Is this possible or am I going to have a heck of a time working with it? My 65 is an early one with a 6 cylinder Hercules engine on it. Thanks in advance!
 
I have had a 96 and a 106, and now a 105.the elevator chains are a go,and as far as sickle parts drive i would sure think they are the same. Do u have a few old 55 combine around your country, they all got hauled in in this area,Good Luck!
 
How come you Farmall guys are working on JD combines?? Should find a 140 or 402 IHC machine. Neighbor has a nice 914 that he pulled out of the shed and resides outside now. Would make someone a nice machine.
 
We had a couple 140's and later a 150. If you forget to take the wrench off of the cyl. shaft you can launch it about 50' into the air. Don't ask me how I know! There was quite a few 65's in the area all but gone now. I know where one might be. Dad always said a 140 would out thresh a 65 and being partial to JI Case and IH machinery I suppose that's how we ended up with them..
 
There were quite a few 65's sold in our area, until the owners learned that they were really quite wimpy compared to other combines on the market. Dad hired a neighbor with your vintage 65 to help us combine one year. Our chain drive G3 MM combine could do a lot more than that 65. The guy traded off the 65 for a bigger machine.
 
You must log in or register to reply here.

Similar threads

S
John deere 55 combine questions
Replies
6
Views
1K
tomstractorsandtoys
tomstractorsandtoys
K
New Old Stock IH Combine Parts
Replies
1
Views
446
560Dennis
560Dennis
tomstractorsandtoys
John Deere 42 combine
Replies
17
Views
550
spacechem
S
H
john deere 55 combine electrical starting problem
Replies
2
Views
669
GermantownGreen
G
S
John deere 55 combine question
Replies
10
Views
2K
David from Kansas
D
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top