David Hunt
Member
Is it possible to change the whole feederhouse with a reverser and put on my 7700? Thanks Dave
- Thread starter David Hunt
- Start date
The complete drive on the left hand side is different. I am not saying you could not do anything but it would be a lot of work and rigging to make the switch. With the advent of Roundup ready soybeans I bet that I do not use the reverser once each season anymore.
And easier solution to you wanting a reverse would be one of the electric reverser kits that several companies offered for the 00 series combines. They basically put a small flywheel on the right had side of the feeder house. Then they mounted a starter motor so it would engage the flywheel and turn the back shaft backwards. It was basically another short jack shaft in the feeder house chain drive on the right side. This allowed the flywheel to be large enough for the starter motors to have enough torque to work. This worked and would be much simplifier to make/do.
And easier solution to you wanting a reverse would be one of the electric reverser kits that several companies offered for the 00 series combines. They basically put a small flywheel on the right had side of the feeder house. Then they mounted a starter motor so it would engage the flywheel and turn the back shaft backwards. It was basically another short jack shaft in the feeder house chain drive on the right side. This allowed the flywheel to be large enough for the starter motors to have enough torque to work. This worked and would be much simplifier to make/do.
todd hamilton
Member
Cousin used his reverser in round up ready beans. When we stopped cultivating we stopped picking up rocks. The combine found them once in a while 
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy