Jddude

New User
Getting ready to run beans with my e3... Changed out sprocket On cylinder to a 42 tooth and I think she is ready to go but just wanna make shure there isn't something else I need to do or watch out for... Thanks in advance
 
I run a 35 tooth so with a 42 tooth you'll probably be more in the middle to top half of the hand crank variable speed cylinder adjustment.

I'd start about 1/4 on the cylinder and if you have green stems not processing well you'll want to close it down from there to crunch them up. I run 3 bars on 1 (rock door), 3 & 5 positions. I put a half round bar on the door last year instead of channel concave to supposedly reduce splits but not sure I saw that much difference. I run my chaffer & sieve at factory suggestions but pretty much turn the air all the way up on both fans.

Good luck! Mike
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top