gary in neb.
Member
so i got the new motor set in my combine and have a different combination of fuel lines. my old engine has a line off the small injector return line that goes back to the tank. new one has two lines that go from the return to the filters.
another issue, the line on the bottom of the injection pump goes from the pump to the filters, but on my old one the line went to the arrow in on the back part of the front filter and on the new one it's on the arrow out.
these two things dont seem right to me. not sure the motor is out of a 510 but pretty sure it is, and probably a newer machine than mine.
only other issue is my fan hits the water pump shaft when i have the bar accross the top of the motor. still have not figured out why it needs to move a half inch.
another issue, the line on the bottom of the injection pump goes from the pump to the filters, but on my old one the line went to the arrow in on the back part of the front filter and on the new one it's on the arrow out.
these two things dont seem right to me. not sure the motor is out of a 510 but pretty sure it is, and probably a newer machine than mine.
only other issue is my fan hits the water pump shaft when i have the bar accross the top of the motor. still have not figured out why it needs to move a half inch.
