Does anyone have an old Deere combine that was set up to run a 343 corn head? I'm needing the RH shaft support that bolts to the rear of the feeder house and supports the shaft all the way on the end on the RH side where the corn head drives. This could be on a 45, 55, 95, 3300 or 4400 so long as they have used a 343 corn head.
I currently have the support bracket to drive a 244 corn head but am fearful of breaking the unsupported shaft with the 343 that drives on the very tip end of the shaft.
I currently have the support bracket to drive a 244 corn head but am fearful of breaking the unsupported shaft with the 343 that drives on the very tip end of the shaft.