Mike, I asked you a while back how much the QT feeder house moved the sickle forward above and beyond the old non-QT platform. We finally got the QT on the combine after 6 new bearings in the feeder house and every single bearing on the 10 ft QT platform. The measurement difference at the tips of the guards is 20 additional inches. It's nice! No more standing on my head to see the sickle. A guy can now just sit up straight in the seat and see what he is doing rather than being hunched over the steering wheel. I thought you might like to know just as an "FYI".
I wanted to take some pictures to post here but rain hit and we had to run the combine to the shed before I could get that done. We did some updates to the 10 ft QT header that I wanted to share pics of. Poly on the floor, poly auger fingers, 900 series reel bats with plastic fingers and bolt in sections in the sickle.
I wanted to take some pictures to post here but rain hit and we had to run the combine to the shed before I could get that done. We did some updates to the 10 ft QT header that I wanted to share pics of. Poly on the floor, poly auger fingers, 900 series reel bats with plastic fingers and bolt in sections in the sickle.