MaverickM23
Member
Working on my 615 and my cylinder speed gauge
seems to be stuck running at 1200 rpm's. I have
changed the pulleys on the side for corn and
the variable speed lever in the cab works. I
can watch the belt move in and out on the
sieves but the speed never changes on the
gauge. I used my electric laser tachometer to
ensure the speed was changing and I have it
running about 560 rpm right now. Does this mean
that my gauge is shot or is it something on the
other end of the cable? I just looked up a new
gauge and its 233 from case any ideas?
seems to be stuck running at 1200 rpm's. I have
changed the pulleys on the side for corn and
the variable speed lever in the cab works. I
can watch the belt move in and out on the
sieves but the speed never changes on the
gauge. I used my electric laser tachometer to
ensure the speed was changing and I have it
running about 560 rpm right now. Does this mean
that my gauge is shot or is it something on the
other end of the cable? I just looked up a new
gauge and its 233 from case any ideas?