Gleaner M / L 3pt header mover?

paul

Well-known Member
Are their 3pt header movers out there?

Does the common JD one fit on a Gleaner M head?

Want to put the dummy head in a low building, working on how to get it there....

Paul
 
And to think I sent a HM one to scrap a few years ago.....could easily been modified for a Gleaner. Picture something like a bale fork frame, with the Gleaner pipe (from thresher housing) mounted on the top. I don"t think the JD would fit- top lumps are not the same as pipe. Are your F machines parts or working? I"ve got 2 for parts- come and get a pipe! My bale forks fit loader and 3 pt- hint!
 
Yea, we made something up for the F series years ago, now the M is different of course.... Just thinking out loud, if the JD woulda worked could borrow from a friend, but I figured it wouldn't.

Got 5 acres of beans out yesterday. Rest are pretty rubbery yet.

Weather not as good as I was hoping today, have a few bales oh grass laying down, but there isn't a lick of drying going on and supposed ti rain by 5:00 now.

Paul
 
How bout getting the front of an M from a salvage yard? Or just split a pipe lengthwise for the coupler, and attach that to a lifting frame.

Maybe make an adapter that attaches to your friend"s JD mover? Would save the grief of making the entire 3ph hookup.

re area crops- silo filling last week for those few left that still fill, couple sand bean fields taken out. Leaves dropping on the heavy ground...had some frost 2 weeks ago- when SO MN did.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top