Charles Krammin
Member
I have many Question on our Historic Charlton Park, Belle City 28 X 48 Thresher, SN 478105?
1. In searching for an operators-parts manual, with the high SN No.478105, Should I be looking for a Case or IHC? What year of production estimate?
In belting up what is the maximum and minimum size (and length) and Driver HP of belting transfer? The driven pulley is 9" and the idle-evenier is 10" I have available power of: my own 38 HP pulley "DC Case". 3020 JD, 720 JD, E-$ coop, steam engines, etc ? Will a 6" X 30' handle transfer?
The machine is in very good health, with very few leaks. The botton Sheive adjustment, is a rod out the side, with notches, but currently no spring pressure, so am holding in adjustment with tie down cord. Was there a spring inside ?
Charles Krammin SW MI club and Park member. Thanks for any advice
1. In searching for an operators-parts manual, with the high SN No.478105, Should I be looking for a Case or IHC? What year of production estimate?
In belting up what is the maximum and minimum size (and length) and Driver HP of belting transfer? The driven pulley is 9" and the idle-evenier is 10" I have available power of: my own 38 HP pulley "DC Case". 3020 JD, 720 JD, E-$ coop, steam engines, etc ? Will a 6" X 30' handle transfer?
The machine is in very good health, with very few leaks. The botton Sheive adjustment, is a rod out the side, with notches, but currently no spring pressure, so am holding in adjustment with tie down cord. Was there a spring inside ?
Charles Krammin SW MI club and Park member. Thanks for any advice