Any ideas what combine this fits?

Do you guys know what combine this fits? I know its most likely a Massey or International.
IMG_4750_zpsbaa86c75.jpg

Thanks
Mike
 
No, but the piece in the upper left corner is the fan and elevator mounting bracket for an AC mounted picker.
 
Ha, I knew that I already sold it, I had about half a picker sitting there but I got this part with it I am just trying to identify it so I can sell it too hopefully.
Mike
 
Extremly doubtful any old combines(still running)
are out there needing that part. It' basicly scrap
iron and should be 'priced' as such.Looks like it may be the upper end of the tailings or maybe clean grain elevator.
 
(quoted from post at 15:04:00 05/15/14) Extremly doubtful any old combines(still running)
are out there needing that part. It' basicly scrap
iron and should be 'priced' as such.Looks like it may be the upper end of the tailings or maybe clean grain elevator.
You are most likely right, but with more and more people restoring implements and harvesters I think I will hold on to it someone might need it someday.
 
Can't tell you a model, but the belt pulley design is definitely IH.

Take a look at the pulley for an IH part #.
 
By George, I think you're RIGHT!

<img src = "http://www.redpowermagazine.com/forums/uploads/monthly_12_2010/post-86-129286763291.jpg">
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top