K gleaner transmissiom

lee little · Dec 11, 2013

How hard is it to remove and replace the transmission in a K gleaner? I am considering buying one with a non functioning transmission. Wondering what kind of a hornets nest I would be getting into.

BANDITFARMER · Dec 11, 2013

Is the transmission bad or is the clutch out of it? A lot of difference in the amount of work need to fix it. Bandit

Bob Bancroft · Dec 11, 2013

Not as easy as it should be. Any of the bigger machines had couplers with easily removable drive axles. If I remember correctly, the E,EIII,K, and K2 all had a solid drive axle coming out of the final drive. Fortunately I never had to get into one like that. But I think you have to remove both final drives before even thinking about removing the trans.

lee little · Dec 11, 2013

The guy says its the trans. I haven't looked yet because it is a good distance away.I thought I would check here before I got too serious. I already have a K with a good trans but a lot of little problems.I guess it would be easier to fix the little problems. Thanks for the help !

K gleaner transmissiom

lee little

Member

BANDITFARMER

Well-known Member

Bob Bancroft

Well-known Member

lee little

Member

Similar threads