Lower the mine is worn and the pins won't stay tight. The shop I took it to recenter and put bushings in the holes did the crappest job in the world, and its not even close. I called salvage yards and have not had any luck. Thanks for any thing you guys can do.
 
will do some checking around for you I have plenty of the uppers but not the lowers will get back to you, and just for reference 600/660/700/900 and 960 all use the same variable drive I know we can find you one, I like to grease mine every 2-4 hr of run time, just a little info for the "new" parts give me a little time
cnt
 
(quoted from post at 11:43:20 12/08/13) Ok I will call tomorrow about it thanks nutty I'm located in northern illinois
Justin. He is on the south slope of the famous Alpine Valley ski hill and amphitheater, about 2-3 miles south of I-43.
 
Send me an email I have a 600 or 660 I will give it to if you pay shipping. I will have to look to see if it is 600 or 660 cnj152
 
I have both lower sheaves, and housing. Off the machine and it's inside. Good condition in michigan. All together as unit.. 100 miles north of detroit.
 
(quoted from post at 16:12:17 12/08/13) try this place and if they can't help let me know

Twist Farm Machinery

262-642-7430

Tried calling them no answer and a full voicemail that's not a good sign.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top