Massey Ferguson 300 Combine - Main grain pan

Alvin Bartleson · Nov 13, 2013

How can I best get in to the main grain pan area of my MF 300 Combine? Only half of it seems to be working. My Operators Manual and Workshop Service Manual only mention the main grain pan, but have no photos or breakdown of how to get to it. Anyone have a parts manual with pictures and breakdown or any suggestions? Thanks.

Mark (ECIN) · Nov 14, 2013

It has been A-LOT of years. But I think you can get to it from the front down under the cylinder right behind where the feeder house attaches.

the tractor vet · Nov 14, 2013

It helps if you pull the feeder house , then let the fun begin . I did one on a 410 many years ago and all i can remember is that it was NOT a 12 pack job - more like a case.

Anonymous-0 · Nov 14, 2013

if you are talkin about the 6 ft long rippled pan ?? my son and I replaced one 15 yrs ago,, it came out the back after removing sieves .. mine was broke when the blok for the cylinder pully wheel rocked over into the grain pan area ,, sumthin had to give , tore the pan in half ...

Alvin Bartleson · Nov 20, 2013

Thanks for the replies...I agree, it looks like more of a 'case' job! Still looking for a breakdown diagram from a parts manual if anyone has one.

Massey Ferguson 300 Combine - Main grain pan

Alvin Bartleson

New User

Mark (ECIN)

Member

the tractor vet

Well-known Member

Anonymous-0

Well-known Member

Alvin Bartleson

New User

Similar threads