WALBRO ADJUSTMENT TOOL

Anonymous-0 · Apr 19, 2009

ANYONE OUT THERE KNOW WERE I CAN FIND THE THE RIGHT TOOL TO ADJUST A WALBRO CARB THAT HAS A (D) SHAPED MIXTURE SCREW.IT'S A SMOOTH SCREW JUST SHAPED LIKE A (D) IT'S A 2008 CARB ON A TROY BILT BLOWER.

joe csuti · Apr 20, 2009

Goto ebay and search item# 380074685646,a little pricey($10)but when you need it,you need it,as it's a special tool,or you can do as I did and goto a local hobby shop(if you can still find)or craft store & get a length of KS thinwall brass tubing same id size as needle or 1 size larger,crimp with needle nose pliers to match width of flat on screw,mtd use's same screw on some of their leaf blowers.

Kentb of SWMO · Apr 20, 2009

I built the one I have from a piece of 1/4 inch brake line. Used a hammer to flaten one side, then tapped it on the carb. adjust screw. Wiggled it around a little to lossen the fit. It works great.

Kent

WALBRO ADJUSTMENT TOOL

Anonymous-0

Well-known Member

joe csuti

Well-known Member

Kentb of SWMO

Well-known Member

Similar threads