Cub Cadet 125 Hydrostatic Drive Problems

Josh M. · Aug 11, 2018

Recently my Cub Cadet 125 has been moving on its own after I put it in the neutral position and get off, It will just start to move backwards slowly and I cant figure out why. Not sure if the pump needs rebuilt or not but if so where could I find a rebuild kit for it?

Bob · Aug 11, 2018

Linkage from lever to hydro is out of adjustment, or worn.

There's hundreds of posts on the 'net as to how to adjust or repair, as needed.

You can download the factory service manual (.pdf format) by checking out the previous thread.
Previous thread with link to factory service manual

ed will · Aug 12, 2018

Hi, jack up the back end. Remove back wheel. Get some one to sit on seat and start motor. Put in neutral with shifter. You will see 2 bolts to loosen and move to where the axle doesn't turn. Put lever to neutral and retighten bolts. 10 min fix. Ed Will Oliver BC

Cub Cadet 125 Hydrostatic Drive Problems

Josh M.

Member

Bob

Well-known Member

ed will

Well-known Member

Similar threads