Cub Cadet XT3 Now it Won't Start

jgc · Dec 23, 2017

Cut the Grass
Blew off the deck and around the engine
Now it says "Low Oil" in the display.
Oil Level is at "Full" on the dip-stick.

1. Any suggestions?

2. Anyone have a wiring diagram and/or schematic they could e-mail to me?

Thanks and Merry Christmas!
JGC

Russ from MN · Dec 23, 2017

Must be the low oil sensor, If your sure it has oil bypass it and start it, maybe it will clean off, otherwise take it out and clean or replace.

Fred2 · Dec 23, 2017

Probably disconnected the wire going to the oil sensor

jgc · Dec 23, 2017

It appears to be the momentary "Start" contacts in the key switch.

With the key in the run position, I can jump the solenoid, and the engine starts and runs normally.

I would really appreciate receiving a PDF of the wiring diagram for an XT3, model 14W-3JM-010.

Thanks,
JGC

Don B. · Dec 23, 2017

Yeah. It's 2 days before Xmas and you're cutting grass that's what's wrong. And we're supposed to get 4 to 7" of the white crap starting in about 8 hours.,..then another one Tues into Wednesday. I DON'T want that I'd much rather mow than blow.

Cub Cadet XT3 Now it Won't Start

jgc

Member

Russ from MN

Well-known Member

Fred2

Member

jgc

Member

Don B.

Member

Similar threads