Bolens 54 deck pto input rpm??

This message is a reply to an archived post by Uppercanada on May 09, 2011 at 00:49:17.
The original subject was "Bolens 54 deck pto input rpm??".

Rated at 2000RPM, my front HT23 output shaft Tachs out at 1575RPM
 

As long as it cuts well, that speed is decent...I NEVER operate mine at "Full, Rated RPM"...but then again, my blades are always sharp..

Has not hurt anything...since they all are over 35 years old..( Bolens with Onan and Kohler engines)..still reliable and still going..!!
 

We raised X-mas trees and they have battled Multi-flora Rose many many times...NOT easy service at all...

NAPA " Fractional HP" Belts will out-last anything 3 to 1.....maybe even longer...!!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top