>"This message is a reply to an archived post by Kelly on October 23, 2011 at 16:03:40.
The original subject was "NOS Clinton Engine Parts".
Posted by Kelly on October 23, 2011 at 16:03:40"
Hello,
I found the above old posting and I thought I'd see if Kelly is still a member or if anyone else happens to have a gas cap for a Clinton engine. It is a screw on gas cap not the 1/4 turn style. The threads are kind of an odd size by today's standards 1 5/8 over the threads of the tank.
Any help is appreciated.
Thanks,
Todd<p
The original subject was "NOS Clinton Engine Parts".
Posted by Kelly on October 23, 2011 at 16:03:40"
Hello,
I found the above old posting and I thought I'd see if Kelly is still a member or if anyone else happens to have a gas cap for a Clinton engine. It is a screw on gas cap not the 1/4 turn style. The threads are kind of an odd size by today's standards 1 5/8 over the threads of the tank.
Any help is appreciated.
Thanks,
Todd<p