446 and 448 seat cushion

Kirk-Tx

Member
Does anyone know where I can get the cushions for these seats. The metal is still good. Both are low profile backs. I ask an upholstery shop and they couldn't fix them. Thanks
 
The cushions are not listed as a separate item in any of the parts manuals. The complete seat is what Case and Ingersoll dealers keep on their shelves. I think that you are looking for something that does not exist. The bolt pattern on the seat bottom is unique to CASE and INGERSOLL. If you do not get an OEM seat, then you will have to re-drill the seat mounting plate. However, the OEM seat is about $160.00 at the dealer. The alternative is this one at Northern Tool for about 1/3rd that price but I believe you will have to re-drill the seat mounting plate.
SEAT
 
I had the seat on my Wards tractor recovered at a local upholstery shop. That was about 20 years ago and it still looks good. Hal
a198553.jpg
 
They are off of Case lawn tractors. Thanks Tom I'll check it out. I'm not sure why the upholstery shop wouldn't do it.
 
The OEM seats were made by the Michigan Seat Company who are still in business today. The seat cushions are thermally formed to the seat pan, thus permanently installing the various patterns you see on original seats in the 70's and 80's. No local upholstery shop has the moulds or dies needed to duplicate the original seats. It would surprise me if you could find an upholsterer who could come close to duplicating an OEM seat for a competitive price to the one available from Northern Tool.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top