mf1650 mower pulley

alexis.marcil · May 26, 2015

Hello, I'm looking for a mower pulley, part #538344m93

joe csuti · May 27, 2015

Your tractor was built by snapper,the pulley you're looking for is actually a snapper pn but is nla from snapper or agro however there are several things you can try for a replacement.

Measure od/bore size,belt width & count number of teeth on pulley then goto mcmaster,grainger or surplus center online & see if they list anything to match your's in timing/cog belt pulley listings,also check local yellow pgs for a bearing/power transmission dealer in your area,take pulley to them & see if they can match.

Another thing you could do is check local snapper dealer/online for pulley pn 7059573 which is still avail,this is the double belt center pulley,several guys on a couple of other websites are saying they are useing this pulley for replacement of left/right spindle pulley although same does not come cheap,most online dealers showing cost of same $170-$185,you might also try searching ebay for both pulley pn.

alexis.marcil · May 27, 2015

thanks for the answer, if i use the double pulleys, will I need to change the cover or will they fit?

joe csuti · May 27, 2015

Looking at the 48" & 54" assembly drawing/parts list for mower decks at partstree covers will probably clear pulley as they cover existing center pulley,easiest way to find out is measure height from deck to top of double pulley then measure height of cover at left/right spindles.

mf1650 mower pulley

alexis.marcil

Member

joe csuti

Well-known Member

alexis.marcil

Member

joe csuti

Well-known Member

Similar threads