JD 318

geoff gwisdala · May 24, 2015

I have a 318 G engine. It will start and run great but after a couple of minutes it blows the fuse from the ignition switch. the fuse is hot. Im lost, please help!

Bob · May 24, 2015

Serial #? Where's the fuse located? A photo would help! Hot MAY mean a poor connection at the fuseholder.

geoff gwisdala · May 24, 2015

The serial number is M00318X222235 and the fuse is about 3 inches from the ignition switch going to a single pole on the switch. Sorry I couldnt get a decent picture

Bob · May 25, 2015

Geoff, is it a 20 Amp fuse? If so, it powers the "time delay module", and maybe the PTO clutch, I didn't look that close. If you care to email me, I'll forward some helpful information schematic and troubleshootimg off-line.

Bob

[email protected]

JD 318

geoff gwisdala

Member

Bob

Well-known Member

geoff gwisdala

Member

Bob

Well-known Member

Similar threads