Dave Sherburne NY
Well-known Member
I worked on my newest old tractor today. I cleaned up and painted the snow blade I got from Loren, the ACG and added a weight rack to the back. I went to Steel Sales to find some short pieces but nothing I could use so I had to climb over all the junk in the tent building and find some.When I was in Wi. last summer I bought a Milwaukee Chop Saw. I finally remembered I had it and it made short work of cutting the steel. I put the pieces from the lift on the tractor and built from there. I only have 3 Farmall weights here, my grandson has the rest at his house. The Case hasn't started good since I got it so I changed some wires and the points and adjusted the choke and it runs real well now. It has a minor leak in the hydraulic lift valve which I won't get to til next summer, what kind of oil goes in the lift system?
I don't have chains for this one so I think I will weight it down good and take it over and leave it at the church and use it on the blacktop.
Notice the Snowcaster in the background of one of the pictures, Got that from ACG too.Still waiting for new bearings for that.
I don't have chains for this one so I think I will weight it down good and take it over and leave it at the church and use it on the blacktop.
Notice the Snowcaster in the background of one of the pictures, Got that from ACG too.Still waiting for new bearings for that.