Unknown

Gil from CA · Sep 9, 2014

Does anyone know who manufactured this plow ?

Anonymous-0 · Sep 9, 2014

The mouldboard could have been made by dozens of different companys.
The arraignment for attaching to a garden tractor was probably made by some Mr. Haney or Arnold Ziffle.

Gil from CA · Sep 9, 2014

From another angle.

ken house · Sep 9, 2014

you gave me quite a chuckle

ShadetreeRet · Sep 9, 2014

Not to be poking fun at your quality equipment, but it looks as if it were custom manufactured by Backyard Equipment Co. (Know what I mean, Vern?"

Kris Golden · Sep 9, 2014

I'd ask over on GTTalk.com - that is unless you just want to know how rare it is and how much its worth. They already get too many of those kinds of posts.

El Toro · Sep 10, 2014

I think it would be hard to mount on a garden tractor. I used a moldboard plow off a Viking walk behind garden tractor on my Wards garden tractor. I had to make a template of the handle bars and a drawbar for mounting the depth lever. The Standardtwin garden tractor used a similar setup. They used a ten inch plow. Here are some pictures on my setup. Also a picture of the Standard Twin with the plow installed. Hal

Lefty · Sep 11, 2014

From the one piece design of the "blade" I would think"very old horse drawn"before replaceable points/share were invented a century or so ago.as to the rest of the piece,could be OEM or modification for repurposing worn out plow.

Unknown

Gil from CA

Member

Anonymous-0

Well-known Member

Gil from CA

Member

ken house

Member

ShadetreeRet

Well-known Member

Kris Golden

Member

El Toro

Well-known Member

Lefty

Well-known Member

Similar threads