broken spring

carrottop

New User
While troubleshooting c-141 motion controls I found a broken spring. one ends fastens onto cam plate, but I do not know where other ends fastens to.App.any and all help on this.
Also I am trying to find some parts for wheelhorse but they are discontinued. Does any one know where to get parts at?Here are part# pin--6127, spring-1230cam--5996 ecc cam follower-5995Thanks in advance for all help
 
Try ordering parts thru a toro dealer,if he can't get for you goto ebay & search wheel horse+pn,all parts except #1230 spring listed.

One of the guys on an online wh forum reports he used toro 83-2820 spring in place of #1230,toro spring is also listed on ebay,If the #1230 spring is the same one that broken,one end connects to cam other end hooks on to a bolt that extends into center section thru left side of center box,this should be shown on your parts list or assembly drawing/parts list for motion control at partstree online,in any case have a least one deep pocket when shopping for these parts.

Is this tractor a basket case you bought & now putting back together as you seem to need a lot of parts for a small area of same?
 
In addition goto toro website in a previous reply & download/save service manual for trans,same will tell you how to adjust cam follower for deadband between for/rev on shifter in addition to setting friction hold on shifter handle.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top