clutch

Johnny 007 · Aug 14, 2014

Hello can anyone give me a few tips how to remove this clutch . Or where the nylock adjusting nuts are located. Thank you!

Johnny 007 · Aug 14, 2014

The clutch is off a john deere 300

Steve@Advance · Aug 15, 2014

The bolt in the center holds it on the crankshaft.

There will be an anti rotation link, looks like that's it on the right, keeps the magnet part from spinning with the pulley, take it loose.

The adjustment nuts are on the back side, you'll see them when you get it off.

Johnny 007 · Aug 15, 2014

Steve, Ok will give it a try. I had already taken that center bolt off , it became looser but still wouldn't cone off. I didn't know if it needed to be pulled off with a puller. Thanks for your help!

Steve@Advance · Aug 15, 2014

Normally don't need a puller, especially if it's loose. Be careful!

Johnny 007 · Aug 17, 2014

Hi Steve, how do you take the anti rotation link loose, is it held on by the 4 bolts on each corner?

clutch

Johnny 007

New User

Johnny 007

New User

Steve@Advance

Well-known Member

Johnny 007

New User

Steve@Advance

Well-known Member

Johnny 007

New User

Similar threads