Bolens 5117H belts

Elmers Grassman · Jun 16, 2014

Main drive belts are slipping bad. Doesn"t appear to be tensioned correctly anybody have a picture of what they should look like?

OldBuzzard · Jun 16, 2014

I just looked at the 5117H (DGT 1700) parts manual, and the only belts I see on that tractor are the PTO belts. The main drive from engine to hydro is a drive shaft.

The PTO belts are HA belts 38.187" long. An HA belt is 1/2" x 5/16". You can just get 38" belts, as that 'extra' .187 is not all that important.

If you send an email to me at: oldbuzz{at}hotmail.com with 5117H in the subject line so I know what you are looking for, I'll reply with that parts manual attached.

Elmers Grassman · Jun 16, 2014

That was poorly worded post. I mean the PTO drive belts. They seem to have way too much slack and seem to rub frame. Spring is intacted and everything appears tight. I have the parts manual just not an assembled pic.

Bolens 1000 · Jul 23, 2014

I know this is an old post but if your still looking I have the matched set of belts for this model.

http://www.ebay.com/itm/Bolens-DGT1700-DuraTrac-5117H-PTO-belts-1752751-Set-of-2-FREE-SHIPPING-/161105787880?pt=LH_DefaultDomain_0&hash=item2582a73be8

Bolens 5117H belts

Elmers Grassman

Member

OldBuzzard

Member

Elmers Grassman

Member

Bolens 1000

Member

Similar threads