John Deere 111 Deck Bearings

Anonymous-0 · Jun 6, 2014

I need to change the bearings in the blade spindle assembly of a 111 mower. This is NOT an L111 but an old machine. What is the correct method of removing the old bearings?

I know about a 110 and own a 112, but where does the 111 fit in the Deere model lineup? I did not know about this model until a few days ago.

Thanks in advance for any help.

Bob · Jun 6, 2014

Here"s a drawing of the spindle from a deck WITHOUT the adjustable front lip (which should be the more common model).

<img src = " http://jdpc.deere.com/pimages/MP75/MP752__________UN02JAN94.gif">

The top nut has to come off, followed by the sheave/pulley, then the woodruff pulley key.

The spindle can then be pressed out of the bearings. the top beaing is then free to come out of the housing, there's a snap ring that has to be removed so the bottom one can come out.

As to the model lineup, this is likely covered on the Weekend Freedom Machines website.
Weekend Freedom Machines

Anonymous-0 · Jun 6, 2014

Thanks Bob.

John Deere 111 Deck Bearings

Anonymous-0

Well-known Member

Bob

Well-known Member

Anonymous-0

Well-known Member

Similar threads