1968 John Deere 112

IrvIA

Member
I'm putting this tractor back together after about a year and I've got these two rods left. I'm almost sure the small one goes on it but I'm not sure about the other one. I need a really good knowledgeable J D guy to help me out. I don't know of any other ones in my area to look at. I went to the dealer and we looked at every page on his computer parts list to no avail. I've got an operators manual for it but not a parts manual.
I'm also having trouble with the variator not working. Every thing under there looks good. I've had it apart, made sure the pulley center will slide back and forth, put on both new John Deere belts and adjusted it according to the manual. I doesn't feel like its hooked to anything when you operate the lever back and forth. I have this spring left also but I thought it might go on the 48" deck. The decks back where I can't readily get at it to assemble it so I'm not sure.
Any ideas??
Thanks Irv
PS looks like my picture posting needs some work too. Couldn't figure out how to get rid of three of them without starting over!!
a96646.jpg

a96646.jpg

a96646.jpg

a96651.jpg

a96652.jpg
 
the spring does look like the idler spring for the deck. the variator wont feel like anythings happening unless the engine is running, kind of like a snowmobile clutch. the rods im sorry, i cant help you with
 
I've had the engine running and it still doesn't do anything. I guess I'm going to have to find someone thats got one and compare them.
I've got a really good digital camera. Ask me why I didn't take pictures of it when I took apart. Hmmmm, don't know....
Thanks



Irv
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top