anyone recognize?

notjustair

Well-known Member
Anyone recognize this rider? I know the picture is bad. It had a 7 horse Briggs on it with a starter/generator. It had a 3 speed trans. You can't tell but the steering wheel wasn't round - it was a 3/4 circle so that you could get the hood open past it.

Just curious as I don't have any pictures that you can read the decals. I've always thought that was one strong 7 horse as we went through stuff on the trench silo that was tall as a man standing. Had to be stronger than my 23 horse Cub Cadet in the shed now.
a96966.jpg
 
Not exactly like one I have but a lot like it. I have an old western auto rider that looks very close to it but did not have the horizontal shaft engine but did have 3 forward speeds and about that size. I still have it all be it I pulled the engine years ago. Still have that engine out there some place and last I knew it ran
 
That is a model that MTD built for various department stores. The powder blue-and-white ones were actually marketed by MTD.
 
Its a MTD sold at Western Auto and other stores such as Firestone. They were well built machines, not like todays stuff.
The old cast iron 7 horse power Briggs engine will out pull a modern engine of twice the rated horse power. Makes one wonder how they rate the HP on the engines today?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top