Author	[Modern View]
ericlb 01-13-2013 17:10:24 70.41.96.39 Report to Moderator	this one has a 11 horse briggs on it, i'll see if i can find some numbers on the engine tomorrow [Reply]   [No Email]
ericlb 01-14-2013 15:10:02 12.189.32.37 Report to Moderator	Re: troybilt carb in reply to ericlb, 01-13-2013 17:10:24   ok here is what i found on the engine, its a 11 horse, briggs industrial plus, the model number is 256427, it also has 2 other numbers on the tag they are 'type, which is 1140E, and "code" which is 9708133A, if anybody has a carb, or a float bowl, to sell id appreciate it, troybilt says this unit was built in 1998, but this one has has so little use that the rubber "hairs", are still on the tires, probably ought to save this one [Reply]  [No Email]
El Toro 01-13-2013 19:18:13 108.3.143.30 Report to Moderator	Re: troybilt carb in reply to ericlb, 01-13-2013 17:10:24   The engine numbers should be the fan shroud on the engine. I had one of those tillers with the 11 hp engine. I don't think they made a lot of them as they were pricey. Hal [Reply]  [No Email]
old 01-13-2013 19:00:35 209.86.226.11 Report to Moderator	Re: troybilt carb in reply to ericlb, 01-13-2013 17:10:24   Horizontal or vertical shaft?? I could well have parts laying around since I also mess with a lot of old lawn mowers etc [Reply]  [No Email]
ericlb 01-14-2013 04:48:00 75.107.64.57 Report to Moderator	Re: troybilt carb in reply to old, 01-13-2013 19:00:35   this one has a horizontal shaft, [Reply]  [No Email]
old 01-14-2013 09:32:29 209.86.226.32 Report to Moderator	Re: troybilt carb in reply to ericlb, 01-14-2013 04:48:00   I was afraid you would say that. LOL Do not have any of the larger B/S engines like that all the ones I have have the vertical shafts so the carbs are different [Reply]  [No Email]