Rebuild Onan Carb..????

BushogPapa · Jan 7, 2013

I have several Bolens 17 and 18 HP Garden Tractors that all get used regular and steady...

The old "QT 17" has an Onan engine and needs either a re-Build kit or a replacement Carburetor..

NAPA does not have the Kits (and WOW, the Prices.!)

Could anyone help me find these parts..??

I cannot get the Needle to work properly..it either wants to Flood or Starve to the point it quits..
I tried an Electric fuel pump and it flooded (4lb)..
I have worked on the Needle TIP and worked it to a good taper, like it should have been. (Rubber tip)..
Any suggestions about another carburetor to use..?
This engine is a REAL Powerhouse..I have the Large-Bore Commercial engine block and want to USE it more..!!!

Thanks..!
Ron.

Ken Combs · Jan 7, 2013

Try Onanparts.com.

BushogPapa · Jan 7, 2013

Thanks a bunch...!!

This is going to Help..!

Ron.

Harvey 2 · Jan 7, 2013

Parts for Onans have allways been overpriced and they aren't getting any better.
One stop gap measure would be to install a inline fuel shut off and adjust the flow to a trickle,that might work. I bought a Cub Cadet several years ago and wondered why it had two shut offs on it, then I found out the carb always wanted to flood. I installed a new float and adjusted it, that stopped the flooding, wasn't even the needle and seat after all.

Anonymous-0 · Jan 7, 2013

Hi.I have A Case 446 with A 16 H.P. Onan. Got carb. kit from Gary's place. Good service good price.

Ken Combs · Jan 7, 2013

I forgot to mention: check your float before ordering parts, and if it is a foam version, order a brass one along with the needle and gaskets. foam + alcohol = frustration!

Harvey 2 · Jan 7, 2013

Where is this Garys place ? I would like to buy some parts, if they are reansoble.

danc11358 · Jan 7, 2013

Gary's Place 1068 E. Hull Rd.Hope Michigan 48628 Tel.989-689-5092.

Billy Shafer · Jan 7, 2013

Try Max Thompson. Over on Smokstak Onan section. He just bought the inventory of a Onan dealer. He may have a kit.

BushogPapa · Jan 8, 2013

Where is "Smokestak"..??
I will look for an "Onan Section"..

Thank you..
Ron..

Harvey 2 · Jan 9, 2013

Thanks a bunch on the location and phone # for Garys Place.
This is what the forum is all about, people helping one another.
Thanks again;

Billy Shafer · Jan 13, 2013

It is smokstak.

kevinsstuff · Jan 16, 2013

i just ordered a gasket kit for my onan 16hp for my case 446 got the parts from cummins service center. cummins is the place to get your high priced service parts for your onan

BushogPapa · Jan 16, 2013

Thanks. everyone for this information..!!!

Ron..

Rebuild Onan Carb..????

BushogPapa

Well-known Member

Ken Combs

Member

BushogPapa

Well-known Member

Harvey 2

Member

Anonymous-0

Well-known Member

Ken Combs

Member

Harvey 2

Member

danc11358

New User

Billy Shafer

Well-known Member

BushogPapa

Well-known Member

Harvey 2

Member

Billy Shafer

Well-known Member

kevinsstuff

Member

BushogPapa

Well-known Member

Similar threads