wheel horse trams

paul n.h. · Oct 26, 2012

have a wheelhorse 212 h hard to shift into reverse shifts into forward but you have to hold it to keep it in do not have a manuel is there a ajustment out side of trams any help would be good thanks paul

joe csuti · Oct 27, 2012

Goto link below & click on toro logo,from garden/lawn tractors listings scroll thru mod#'s,select number that you have on tractor id plate/tag,look at assembly drawing for hydrostatic transaxle-control linkage assembly drawing/parts list.

In drawing nut(9) appears to be tension adj for cam plate/netural return plate,you might try adjusting this nut to see if helps/cures problem,if not then there may be a problem with worn/loose or rusty/dirty shift linkage parts or within transaxle itself,you might have to disconnect linkage at trans to isolate problem to linkage or internal transaxle problem.

A service manual for trans is avail as a free download at toro website,but no operators manual avail there as a download.You might try going to ebay & see if a manual for 212h listed or a service manual for the 200 series tractors,just type wheelhorse manual in search & go thru listings.
toro

El Toro · Oct 28, 2012

Is this a hydrostatic tranny? If it is there's probably an adjustment on the spring tension on your shift lever so the shift lever will stay where you place it. Hal

wheel horse trams

paul n.h.

Member

joe csuti

Well-known Member

El Toro

Well-known Member

Similar threads