Author	[Modern View]
Pitch 08-22-2012 04:03:39 66.66.18.32 Report to Moderator	I know that it is worth what someone is willing to pay,but I need a ballpark starting figure. Gravely 8123, will run but needs carb and govenor work, forward and reverse clutchs are strong,PTO clutch works,but I have doubts about it. Hydraulics good, has front pto bearing and shafts. New skin on deck,spindles need work,has rear wheel weights,tires are fair to good. I've replaced it with something more nimble and newer and want to get rid of it. [Reply]   [No Email]
shinnery 08-23-2012 00:10:42 216.189.193.75 Report to Moderator	Re: Gravely 8123 in reply to Pitch, 08-22-2012 04:03:39   As they say in real estate, Location, Location and Location. :shock: [Reply]  [No Email]
ray hofstetter 08-22-2012 17:26:43 166.137.88.21 Report to Moderator	Re: Gravely 8123 in reply to Pitch, 08-22-2012 04:03:39   Pitch, like ya said- it's worth whatever someone's willing to pay. I'd say $1500. I've got 3 Gravelys and wouldn't part with any of them. They don't make tractors like that anymore.... [Reply]  [No Email]
Paul Simmer 08-22-2012 10:26:11 75.5.237.130 Report to Moderator	Re: Gravely 8123 in reply to Pitch, 08-22-2012 04:03:39   In my humble opinion, it seems that if you got the carb and governor straightened out it would be well worth the time and money. As is, as a buyer I would be hesitant to give much for it until I knew how well it ran. Those Kohlers are a good engine, but I would want to hear it run. As is I wouldn't think it would bring too much. Not sure what you mean about the PTO clutch. I bought one several years ago that the clutch wouldn't disengage. I changed the oil in the trans, then stuck a rod in the pto shaft so it couldn't turn and turned the engine over by hand. I got it to break loose and after using it some it works fine. Not sure if that is what is wrong with yhours or not. Good luck. [Reply]  [No Email]