Troy bilt pony?

Geo-TH,In

Well-known Member
I purchased a used 5 hp flat head briggs on a troy bilt pony, only to discover a major crack in the intake manifold.

I have attempted to repair it with JB weld. Repair, seems to be holding, however what if it fails?

Then I discovered this motor is very special. It has two output shafts that are counter rotating, one shaft is for forward and the other is for reverse.

Any idea of where I can purchase this motor? I've been on line and couldn't find anything like it?

George
 
It's available, I've replaced my mother's pony motor twice. Enter troy built engine, and I bet something will pop up on fleabay!
 
I bought one off of Ebay for $40 two years ago.


Or you could get similar "regular" 5hp engine and swap the cam shaft out of yours into the "new" one.
 
I went to ebay and they want $40 for a rusted out gas tank for the 5 hp briggs.

Wanna sell your motor for $50?

How could I swap the cam? My motor has two output shafts. All the briggs I've seen has a threaded hole where my second shaft is.
George
 
Try smallenginewarehouse. I bought a 10hp B&S engine from them in 2006 for my Horse model Troy Bilt. Hal
1-800-321-6725
 
Nope.

Mounted it on a Pony I bought with a froze engine and sold it for $400.

I watched for a couple months before I found it. If yours is running OK I would keep watching for a while and eventually one will pop up. I don't think there is even a 5hp Briggs with a PTO shaft on Ebay right now.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top