Cub 125 PTO

RichHielscher · Jul 10, 2012

Can the PTO on a cub cadet 125 be rebuilt without taking it off?

wisbaker · Jul 10, 2012

I don't think so, but you only have to pull the clutch pack and not the basket & pulley.

jb9959 · Jul 10, 2012

No.

You have to disassemble the unit to install the clutch disk. There are 6 set screws that need to be removed before you slide the PTO assembly off the shaft. I would soak the screws with PC Blaster before attempting to un-screw them. It takes a 1/8-inch long handle allen wrench.

dhermesc · Jul 10, 2012

Make sure your set screw heads are clean before you start so you can properly insert the allen wrench fully in the head. If you don't you can easily strip the head and you will have to use a drill to remove the screws and will probably ruin the clutch in the process.

Greenday · Jul 11, 2012

You need a manual to learn how to get the clutch off unless youalready know how. There is a bearing with a eccentric lock collar that has to come loose.

Anonymous-0 · Jul 17, 2012

The set screws are in 3 different holes spaced around the hub, they are small hex allen wrench, one on top to lock the bottom screw, 6 total. You can then pull the clutch off.

Cub 125 PTO

RichHielscher

New User

wisbaker

Well-known Member

jb9959

Member

dhermesc

Well-known Member

Greenday

Well-known Member

Anonymous-0

Well-known Member

Similar threads