Garden Tractor plowing

1964Deere · Feb 26, 2011

Hey guys, I got a john deere 110 round fender that I am wanting to plow with. Just wondering if anybody plows with one? What are the pros and cons? What size plows do you pull?

If you don't plow with a 110 what do you plow with and how does it work for you?

Anonymous-0 · Feb 26, 2011

Go to weekendfreedommachinesDOTcom and search on plow or plow day or plow specialfor lots of information.

You will most likely want to get a sleeve hitch attachment and a sleeve hitch plow. Wheel weights and lug tires help a lot. Brinley is a popular plow make. The plows usually run eight, ten, or twelve inches.

Roger Henning on that board has a round fender 110 that's orange with an old sears three point hitch and sears three point plow that works nicely.

El Toro · Feb 27, 2011

You need to get what Steve suggested plus tire chains. Here's my Wards tractor and the 8-inch plow is off an old Viking walk behind garden tractor I bought in 1960. Hal

Greenfrog · Mar 1, 2011

I have a Cub Cadet 128 with a Planet Jr. plow behind it. That is off of a walk behind tractor. It is a 6.5 inch plow, and does a good job. Tire chain on the left wheel helps and or get bar/lug tires. I incorporated a linear actuator to raise the plow, rather that lift arm. ...or known as an electric lift. Kind of like an electric seat motor, but much more powerful;. These little tractor do a good job. It pulls easy. Often wanted to find a larger plow.

Garden Tractor plowing

1964Deere

Member

Anonymous-0

Well-known Member

El Toro

Well-known Member

Greenfrog

Member

Similar threads