Hilltopper
Member
I have a problem with the clutch not wanting to release when the tractor has set for a few hours. It is adjusted correctly. After it gets used a while it will release ok. I can push in the clutch after sitting for a while and it will continue to move until I load it with the brakes.
I have split the tractor and checked the throw out bearing and the pilot bearing. I lengtened the screws on the pressure plate arms and made sure they were all the same length. This helped for a few weeks now it is bad again.
I am out of ideas. Thanks.
I have split the tractor and checked the throw out bearing and the pilot bearing. I lengtened the screws on the pressure plate arms and made sure they were all the same length. This helped for a few weeks now it is bad again.
I am out of ideas. Thanks.