(800) 853-2651
SHOP NOW

3 point hitch will not work

D

DSS7

New User
This message is a reply to an archived post by Stan Eagleson on May 05, 2010 at 06:21:37.
The original subject was "Re: 3 point hitch will not work".

Ok, it"s been a while. Ford Dexta. Changed fluid, changed return filter, cleaned metal screen filter attached to pump....3 point lift still will not work. Pulled pump and the gears seem fine. To the eye all seems ok except all the seals are flat. Not sure if this is it or not?? Any ideas???
 
Never worked on a Dexta Hyd pump.

But have worked on MF 135 ones.

It would seem to me if seals are flat they should be replaced as they should have a bit of a round to them.

Also have you tried turning it in a bath of oil to see if it is pumpinmg at all.

With some ingenuity can hook it up to a drill with a belt to turn it to see if pumping, which wil confirm if seals are bad.

Kenneth Armour
 
Update: Started all over. Drained, removed cover, removed pump, took everything apart and checked again. Reinstalled all, added oil, started tractor and lift slowly began to come up. Ran through a few cycles and now works like a charm?????? Not sure what it was but it works great. Thanks to everyone for your ideas and help.
 
You must log in or register to reply here.

Similar threads

R
3-Point Hitch Snowblower Hookup Question
Replies
10
Views
349
BarnyardEngineering
BarnyardEngineering
T
Ford Commander 6000 3 Point hitch not working
Replies
9
Views
393
Tom in Mo.
Tom in Mo.
S
John Deere A can't get the 3 point hitch to go up
Replies
6
Views
444
used red MN
U
B
Jerky, chattering hydraulics John Deere 1630
Replies
7
Views
426
buickanddeere
B
Josh M.
Ford 3000 3 point
Replies
8
Views
370
Mike(NEOhio)
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top