Author	[Modern View]
maplehillfrm 04-08-2010 09:38:28 74.32.157.5 Report to Moderator	ok I went out and took the block off that holds the injector lines,, [those little hex screws are a pain],, I found that I had a broken spring on #4,, and a broken tab off of the valve on #1,, as well as #1 stuck up ,,, could the #1 valve being stuck up restrict the fuel from getting to the others full strenght?? I now know why #1 wasnt getting fuel anyway,, now I need to find a spring and a valve.... any one have a set laying around?? new or used would be ok, or a place I can get them,, the number on the injector block is P 4596 --then 1A, thanks pat,, I figure I cant do any more until I get these parts fixed,,k [Reply]   [No Email]
maplehillfrm 04-12-2010 20:28:02 74.32.141.110 Report to Moderator	Re: update on super major fuel ,,pic in reply to Aussie Frank, 04-08-2010 09:38:28   would you be willing to ship a valve and a spring to ny? I can give you addess and send payment to you, let me know the price, I appreciate it, pat\ maplehillfrm@yahoo.com   [Reply]  [No Email]
hector gemme 04-12-2010 12:51:50 69.156.163.90 Report to Moderator	Re: update on super major fuel ,,pic in reply to maplehillfrm, 04-08-2010 09:38:28   I just dismantled a SIMMS pump and have these parts   [Reply]  [No Email]
maplehillfrm 04-11-2010 17:26:31 74.32.141.110 Report to Moderator	Re: update on super major fuel ,,pic in reply to MIKEB6503, 04-08-2010 09:38:28   thanks for the heads up, I tried to see where to send a email, but couldnt find it,, I have had no luck finding the parts,, I finally I think found someone who could braze,,, I may see him tommorow,, if it works great,, or if you want to sell the valve and the spring I would be interested, tnansk pat   [Reply]  [No Email]
Grabatire 04-11-2010 10:14:05 173.210.178.200 Report to Moderator	Re: update on super major fuel ,,pic in reply to maplehillfrm, 04-08-2010 09:38:28   If what you have is a Simms pump, I may have one that can be cannibalized if it comes to that. My email is open.   [Reply]  [No Email]
maplehillfrm 04-10-2010 06:41:50 74.32.141.110 Report to Moderator	Re: update on super major fuel ,,pic in reply to MIKEB6503, 04-08-2010 09:38:28   lonzo said: (quoted from post at 02:49:18 04/10/10) i had the same problem with my pump and i brazed the lever back together and works fine, You should see if the plunger slides up and down and turns freely befor you weld the broken part back on. i didn't want to spend any money at a pump shop and didn't have a thing to loose thats the reason i welded mine thanks lonzo, I was thinking that may be my next choice. I wasnt sure if it would work, but its good to hear from someone who has had good results,, it seems that may be the way to go, I appreciate it, pat   [Reply]  [No Email]
lonzo 04-09-2010 18:49:18 64.85.217.62 Report to Moderator	Re: update on super major fuel ,,pic in reply to maplehillfrm, 04-08-2010 09:38:28   i had the same problem with my pump and i brazed the lever back together and works fine, You should see if the plunger slides up and down and turns freely befor you weld the broken part back on. i didn't want to spend any money at a pump shop and didn't have a thing to loose thats the reason i welded mine   [Reply]  [No Email]