diff bearing holder shims?

Kerry Borsch · Mar 7, 2010

ANyone have a source for these puppy's? The book says 2 x .003 and 2 X .005 for a total of .016 and no more. I removed the diff and mine are broken and missing. They go between the bearing holders and outside case. I was thinking about gasket material if I could find .008 for each side. I would loose the ability to adjust ring and pinion lash unless is is within tollerance by chance. Thanks Kerry '64 S M

bjb in TX from Ne · Mar 8, 2010

You can buy shim stock from McMaster-Carr:

<a href="http://www.mcmaster.com/#shim-stock/=64rcue">Shim Stock</a>

Kerry Borsch · Mar 10, 2010

Thanks for the link, I looked them up and have taken measurements. Kerry

diff bearing holder shims?

Kerry Borsch

Member

bjb in TX from Ne

Member

Kerry Borsch

Member

Similar threads