fordson major 3 point linkage.

hi all, im new to the fordsons but now hav 1 and a parts 1, im a car wrecker so the rear loader is good for what i need, the bucket picks up all my scrap easily and squashes old car bodies verry small,
just need to convert the power steer from the parts tractor and ill b happy for a little longer,

but im looking at doing a 3point linkage mainly for grader blade and a back tray, also quick hitch to the car trailer to get it thru the mud round the yard in the winter,if i get flash enuf to make a hydraulic pto then more gear would be added.

i know i have do some clever engineering to get a 3 pt linkage on here around the ram at the back and i have the lif and top link design in my head, but the question to all the major owners out there is can i please get a detailed pic from some1 on where the botom links attatch to the tractor, i can see what looks like a pin hole with 3 bolt holes around it, that could be for a bracket to bolt to for the botom arm?? other wise ill just make some attatchments with the frame i need.

any help on this apreciated, pics of fordson bottom links please from even fordons without rear loader.

sorry this draged on,
cheers hayden

with luck this will give you a good idea in answer to your question. Its the best pic I can find. As you see its a heavy plate with three bolts to hold it on and a pinion to attach the hydraulic arm. Ignore the wording. Hope this helps. MTF

thanks for that, it was just what i needed, and the bottom links do hook where i thort, now im on the hunt for some old linkage arms and start with making brackets, and a ram for the lifting part, then mayby a hydrolic motor for a PTO,