4600su 3pt problems

Matt L

Member
Bought a 4600 awhile back. I shoulda known more about em to say the least...
I thought the draft lever was the position control lever. Never tried both levers when I test drove it. Was to busy looking at what was what and seeing all the other possible issues it had.
Go to mow with it when I got it home and the 3pt goes all the way up. Thats when I figured out what lever was what.
What would cause the position control lever not to work? Draft seems to work just fine.
Internal linkage problem?
 

Not familiar with the dual lever controls, but think I understand the working principle.
Try raising the draft lever fully up then work the lift lever to see if you have position control.

Get yourself a reprint of the operators manual and at lease a I-T repair manual.
 
Draft control lever is at the bottom. Tried it a few different ways, position lever wont even hiccup and do anything.

My 641 the draft lever had to be put in the middle for it to work- it had a pin that was worn out is all.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top