When I start the tractor the amp goes to full charge..approx. 30A on the plus side but then in about 15 sec. the needle starts bouncing from 0 to +30. I take the regulator cover off and I see arcing contacts on both relays. This regulator is a brand new 12v from YT. The generator has been taken apart and cleaned up. The brushes look good ad are making good contact with the commutator. Do I take the gen. and regulator into a shop for testing or do I just go to NAPA and buy another regulator??
I do have this tractor wired Neg. Ground and have polarized the gen.( Bat. to fld. terminal at the generator)
I do have this tractor wired Neg. Ground and have polarized the gen.( Bat. to fld. terminal at the generator)