Lynn Patrick
Well-known Member
You all were so helpful in helping me get the hydraulics working on my Jubilee, now I have bought a 1963 4 cylinder 2000 that sat for a year. It starts & runs good, but the 3 point doesn't move at all in either position or draft. The PO said it worked fine a year ago, so I am hoping it is nothing too serious!
I checked the pump prime w/a hose from the allen head plug to the fill hole & got a good flow, so it has not lost prime.
Where do I go next? I checked the I&T FO-20, but don't have the proper tools to pull the unloading or control valve.
Any suggestions?
Thanks,
Lynn
I checked the pump prime w/a hose from the allen head plug to the fill hole & got a good flow, so it has not lost prime.
Where do I go next? I checked the I&T FO-20, but don't have the proper tools to pull the unloading or control valve.
Any suggestions?
Thanks,
Lynn