Recognize this brake shoe?

Royse

Well-known Member
I ordered a pair of brake shoes for a 3000.
The bottom one here is correct, but the top one is not.
Seller already replaced it, so my 3000 has new brakes,
but what does this other shoe fit?

Compared to the 3000 shoe, you can see the two holes for the
hold back springs are missing, there is extra bracing on the right
end and the other end of the shoe has a half square instead of a
half round opening. Dimensions and arc are the same.

7634.jpg
 
(quoted from post at 15:46:27 12/15/17) 3500 uses different shoe than 3000/3400. so possibilty.
Don't know if it's the camera angle or not, but they don't appear to have the same arc. Top one looks like it fits a smaller diameter drum.
 
just by looking at the shoes , the bottom one is the primary and top is the secondary shoe, meaning it is the rear one. the primary shoes always have a shorter lining . so not sure if that has anything to do with the difference here. but in automotive stuff its usually only the lining that is different lengths.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top