Hydraulics for 960 ford question.

I have 960 Ford tractor that I'd like to get a hydraulic setup to run a remote cylinder to lower and raise a disk. What would be the best way to accomplish this?

Thanks
Dave
 
Royce Sir, Attached is a picture of my 960. Do I need to purchase this? https://www.link_disallowed/FDS3364Single-Spool-Double-Acting-Hydraulic-Remote-Valve-Kit?
CID=FDS3364&gclid=EAIaIQobChMI3vGhwveF2AIVjR2BCh1W0w0BEAQYAyABEgKmQfD_BwE

Or is there a more economical way?

Dave
a250215.jpg
 
Dave, the link was not allowed on the site, so I'm not sure what you're talking about purchasing.
That plate you pictured with the five bolts and one plug is what the valve replaces though.
 
Royse Sir,

I got it. I need to remove the plate and buy a valve that will fit. The link that didn't work was for a two way valve for a ford.

Thanks Much.

Dave
 
Doesn't seem like I helped much, but you're welcome.
There are new ones available. I have no experience with them,
but the position of the handles don't look comfortable to me.
That could be because I'm familiar with the old style.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top