tysmobiletractor
Member
I recently put new material points in and now lost current in distributor.
Also coil now has power only coming in but not going to distributor. But when I remove coil wire from distributor I then have power on both sides of coil.
If I touch coil wire to distributor contact it sparks, but no power is sent to points.
Bad ground? Or contact in points?
Any ideas what could cause this?
The connection s all seem good.
Also coil now has power only coming in but not going to distributor. But when I remove coil wire from distributor I then have power on both sides of coil.
If I touch coil wire to distributor contact it sparks, but no power is sent to points.
Bad ground? Or contact in points?
Any ideas what could cause this?
The connection s all seem good.