TW35 axle housing gasket

I would chuck the gasket and use some anaerobic sealant instead. Above are instructions for the Genesis tractors, which replaced the TW/8030 series tractors.

Did you get your shimming process all figured out?
a176755.jpg
 
Thanks Bern for the reply. That is good news! I guess that there is clearance enough in the shaft and gears to eliminate the metal gasket.I think I'll use that new permatex ultra black. I used that once before and that is some good stuff. I'll have to make some pilot bolts like your article suggested.
Luckily I didn't have to take the axle out of the housing. I just swapped housings with the junkyard. I even got a little bit better sun gear than mine was. Mine had a little hauling on one tooth.
Now if the warm weather would come back!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top